The model reads an input namelist from stdin at runtime. Following is a list and description of available namelist input parameters. case_name Type: character(len=16) Default: "null" Required: no, but highly recommended Description: This is the case name text string that appears in output files to help identify the model run. case_desc Type: character(len=64) Default: "null" Required: no, but highly recommended Description: This is a short text string (typically less than 80 chars) which is included in output files to help identify the model run. ncpl Type: integer Default: 24 Required: no Description: This specifies how many times per day the model communicates (exchanges data) with the coupler. data_dir Type: character(len=64) Default: 'null' Required: yes Description: This specifies where the atmosphere data input file sequence is found. The data files are assumed to be named "yyyy-mm.nc", where yyyy is the four digit year and mm is the two digit month of the data file. Examples: (1) data_dir = "cp:~jdoe/data " => look for input data in user djoe's home directory in the data subdirectory. (2) data_dir = "mss:/JDOE/data " => look for input data on NCAR's Mass Storage System archival device. data_year0 Type: integer Default: 1 Required: no (assuming files 0001-01.nc thru 00001-12.nc exists in data_dir) Description: This specifies the first year in the input atmosphere data file sequence. data_nyear Type: integer Default: 1 Required: no Description: This specifies the number of years in the input atmosphere data file sequence. data_oyear Type: integer Default: 1 Required: no Description: This specifies the "offset year" for the input atmosphere data file sequence. The data file for data_year0 will coincide with the simulation year data_oyear. mss_rmlf Type: integer boolean (0 <=> false) Default: 0 Required: no Description: This specifies whether to remove the local copy of an input atmosphere data file after it has been read in by the model. Iff mss_rmlf = 0, then the model will not remove the local file. flux_albfb Type: integer boolean (0 <=> false) Default: 0 Required: no Description: If flux_albfb = true, then albedo feedback is activated. flux_rain2snow Type: integer boolean (0 <=> false) Default: 0 Required: no Description: If there is no snow data on the input data files -- only unspecified "precipitation": if flux_rain2snow = false, then all precipitation is interpreted as rain and there is no snow anywhere. if flux_rain2snow = true, then the precipitation data will be divided between rain and snow based on air temperature: * air temp > 2 degrees C => all rain, no snow * air temp < 0 degrees C => no rain, all snow * 0 degrees C < air temp < 2 degrees C => partial rain and snow flux_swfact Type: real Default: 1.0 Required: no Description: This factor is applied to all shortwave fields. This can be used to arbitrarily increase or decrease shortwave values. info_dbug Type: integer Default: 1 Required: no Description: Debugging information level: 0, 1, 2, or 3. * 0 => write the least amount of debugging information to stdout * 1 => write a small amount of debugging information to stdout * 2 => write a medium amount of debugging information to stdout * 3 => write a large amount of debugging information to stdout