!===============================================================================
! SVN: $Id: shr_strdata.F90 11584 2008-09-08 03:16:24Z mvertens $
! SVN: $HeadURL: https://svn-ccsm-models.cgd.ucar.edu/dlnd7/trunk_tags/dlnd7_090320/shr_strdata.F90 $
!===============================================================================
!BOP ===========================================================================
!
! !MODULE: shr_strdata_mod -- holds data and methods to advance data models
!
! !DESCRIPTION:
! holds data and methods to advance data models
!
! !REVISION HISTORY:
! 2009-Apr-15 - T. Craig initial version
!
! !INTERFACE: ------------------------------------------------------------------
module shr_strdata_mod 5,16
use shr_const_mod
, only: SHR_CONST_PI
use shr_kind_mod, only: IN=>SHR_KIND_IN, R8=>SHR_KIND_R8, &
CS=>SHR_KIND_CS, CL=>SHR_KIND_CL, &
CX=>SHR_KIND_CX
use shr_sys_mod, only : shr_sys_abort, shr_sys_flush
use shr_mpi_mod, only : shr_mpi_bcast
use shr_file_mod, only : shr_file_getunit, shr_file_freeunit
use shr_log_mod, only: loglev => shr_log_Level
use shr_log_mod, only: logunit => shr_log_Unit
use shr_stream_mod ! stream data type and methods
use shr_string_mod
use shr_map_mod
use shr_cal_mod, only: shr_cal_date2eday
use shr_orb_mod, only: shr_orb_decl, shr_orb_cosz, shr_orb_undef_real
use shr_tinterp_mod
use shr_dmodel_mod ! shr data model stuff
use shr_mct_mod
use mct_mod ! mct
use perf_mod ! timing
use pio ! pio
implicit none
private
! !PUBLIC TYPES:
public shr_strdata_type
! !PUBLIC MEMBER FUNCTIONS:
public shr_strdata_readnml
public shr_strdata_bcastnml
public shr_strdata_restRead
public shr_strdata_restWrite
public shr_strdata_setOrbs
public shr_strdata_print
public shr_strdata_init
public shr_strdata_create
public shr_strdata_advance
public shr_strdata_clean
public shr_strdata_setlogunit
! !PUBLIC DATA MEMBERS:
! !PRIVATE:
integer(IN),parameter :: nStrMax = 30
integer(IN),parameter :: nVecMax = 30
character(len=*),public,parameter :: shr_strdata_nullstr = 'null'
character(len=*),parameter :: shr_strdata_unset = 'NOT_SET'
real(R8),parameter,private :: dtlimit_default = 1.5_R8
type shr_strdata_type
! --- set by input ---
character(CL) :: dataMode ! flags physics options wrt input data
character(CL) :: domainFile ! file containing domain info
character(CL) :: streams (nStrMax) ! stream description file names
character(CL) :: taxMode (nStrMax) = trim(shr_stream_taxis_cycle) ! time axis cycling mode
real(R8) :: dtlimit (nStrMax) = dtlimit_default ! dt max/min limit
character(CL) :: vectors (nVecMax) ! define vectors to vector map
character(CL) :: fillalgo(nStrMax) ! fill algorithm
character(CL) :: fillmask(nStrMax) ! fill mask
character(CL) :: fillread(nStrMax) ! fill mapping file to read
character(CL) :: fillwrit(nStrMax) ! fill mapping file to write
character(CL) :: mapalgo (nStrMax) ! scalar map algorithm
character(CL) :: mapmask (nStrMax) ! scalar map mask
character(CL) :: mapread(nStrMax) ! regrid mapping file to read
character(CL) :: mapwrit(nStrMax) ! regrid mapping file to write
character(CL) :: tintalgo(nStrMax) ! time interpolation algorithm
integer(IN) :: io_type
integer(IN) :: num_iotasks
integer(IN) :: io_root
integer(IN) :: io_stride
integer(IN) :: num_agg
!--- data required by cosz t-interp method, set by user ---
real(R8) :: eccen
real(R8) :: mvelpp
real(R8) :: lambm0
real(R8) :: obliqr
integer(IN) :: modeldt ! model dt in seconds
! --- internal, public ---
integer(IN) :: nxg = 0
integer(IN) :: nyg = 0
integer(IN) :: lsize
type(mct_gsmap) :: gsmap
type(mct_ggrid) :: grid
type(mct_avect) :: avs(nStrMax)
! --- internal ---
type(shr_stream_streamType) :: stream(nStrMax)
type(iosystem_desc_t) :: pio_subsystem
type(io_desc_t) :: pio_iodesc(nStrMax)
integer(IN) :: nstreams = 0 ! number of streams
integer(IN) :: strnxg(nStrMax)
integer(IN) :: strnyg(nStrMax)
logical :: dofill(nStrMax)
logical :: domaps(nStrMax)
integer(IN) :: lsizeR(nStrMax)
type(mct_gsmap) :: gsmapR(nStrMax)
type(mct_rearr) :: rearrR(nStrMax)
type(mct_ggrid) :: gridR(nStrMax)
type(mct_avect) :: avRLB(nStrMax)
type(mct_avect) :: avRUB(nStrMax)
type(mct_avect) :: avFUB(nStrMax)
type(mct_avect) :: avFLB(nStrMax)
type(mct_avect) :: avCoszen(nStrMax) ! data assocaited with coszen time interp
type(mct_sMatP) :: sMatPf(nStrMax)
type(mct_sMatP) :: sMatPs(nStrMax)
integer(IN) :: ymdLB(nStrMax),todLB(nStrMax)
integer(IN) :: ymdUB(nStrMax),todUB(nStrMax)
real(R8) :: dtmin(nStrMax) = 1.0e30
real(R8) :: dtmax(nStrMax) = 0.0
integer(IN) :: ymd ,tod
integer(IN) :: nvectors ! number of vectors
integer(IN) :: ustrm (nVecMax)
integer(IN) :: vstrm (nVecMax)
character(CL) :: allocstring
end type shr_strdata_type
real(R8),parameter,private :: deg2rad = SHR_CONST_PI/180.0_R8
character(len=*),parameter :: allocstring_value = 'strdata_allocated'
!===============================================================================
contains
!===============================================================================
subroutine shr_strdata_init(SDAT,mpicom,compid,name,scmmode,scmlon,scmlat, & 13,27
gsmap,ggrid,nxg,nyg)
implicit none
type(shr_strdata_type),intent(inout) :: SDAT
integer(IN) ,intent(in) :: mpicom
integer(IN) ,intent(in) :: compid
character(len=*) ,intent(in),optional :: name
logical ,intent(in),optional :: scmmode
real(R8) ,intent(in),optional :: scmlon
real(R8) ,intent(in),optional :: scmlat
type(mct_gsmap) ,intent(in),optional :: gsmap
type(mct_ggrid) ,intent(in),optional :: ggrid
integer(IN) ,intent(in),optional :: nxg
integer(IN) ,intent(in),optional :: nyg
integer(IN) :: n,m,k ! generic index
integer(IN) :: nu,nv ! u,v index
integer(IN) :: my_task,npes ! my task, total pes
integer(IN),parameter :: master_task = 0
character(CS) :: lname ! local name
character(CL) :: filePath ! generic file path
character(CL) :: fileName ! generic file name
character(CS) :: timeName ! domain file: time variable name
character(CS) :: lonName ! domain file: lon variable name
character(CS) :: latName ! domain file: lat variable name
character(CS) :: maskName ! domain file: mask variable name
character(CS) :: areaName ! domain file: area variable name
character(CS) :: uname ! u vector field name
character(CS) :: vname ! v vector field name
character(CX) :: fldList ! list of fields
integer(IN) :: lsize
integer(IN) :: nfiles
integer(IN) :: ierr
integer(IN) :: method
integer(IN), pointer :: dof(:)
type(mct_sMat):: sMati
logical :: lscmmode
character(len=*),parameter :: subname = "(shr_strdata_init) "
character(*),parameter :: F00 = "('(shr_strdata_init) ',8a)"
!-------------------------------------------------------------------------------
!
!-------------------------------------------------------------------------------
call MPI_COMM_SIZE(mpicom,npes,ierr)
call MPI_COMM_RANK(mpicom,my_task,ierr)
!--- Count streams again in case user made changes ---
if (my_task == master_task) then
do n=1,nStrMax
!--- check if a streams string is defined in strdata
if (trim(SDAT%streams(n)) /= trim(shr_strdata_nullstr)) SDAT%nstreams = max(SDAT%nstreams,n)
!--- check if a filename is defined in the stream
call shr_stream_getNFiles(SDAT%stream(n),nfiles)
if (nfiles > 0) SDAT%nstreams = max(SDAT%nstreams,n)
if (trim(SDAT%taxMode(n)) == trim(shr_stream_taxis_extend)) SDAT%dtlimit(n) = 1.0e30
end do
SDAT%nvectors = 0
do n=1,nVecMax
if (trim(SDAT%vectors(n)) /= trim(shr_strdata_nullstr)) SDAT%nvectors = n
end do
endif
call shr_mpi_bcast(SDAT%nstreams ,mpicom,'nstreams')
call shr_mpi_bcast(SDAT%nvectors ,mpicom,'nvectors')
call shr_mpi_bcast(SDAT%dtlimit ,mpicom,'dtlimit')
if (SDAT%nstreams < 1) return
n = 0
if (present(gsmap)) then
n = n + 1
endif
if (present(ggrid)) then
n = n + 1
endif
if (present(nxg)) then
n = n + 1
endif
if (present(nyg)) then
n = n + 1
endif
if ( n == 0 .or. n == 4) then
! either all set or none set, this is OK
else
write(logunit,*) subname,' ERROR: gsmap, ggrid, nxg, and nyg must be specified together'
call shr_sys_abort(subname//' ERROR: gsmap, ggrid, nxg, nyg set together')
endif
lscmmode = .false.
if (present(scmmode)) then
lscmmode = scmmode
if (lscmmode) then
if (.not.present(scmlon) .or. .not.present(scmlat)) then
write(logunit,*) subname,' ERROR: scmmode requires scmlon and scmlat'
call shr_sys_abort(subname//' ERROR: scmmode1 lon lat')
endif
endif
endif
lname = ""
if (present(name)) then
lname = "_"//trim(name)
endif
! --- initialize streams and stream domains ---
call pio_init(my_task, mpicom, SDAT%num_iotasks, SDAT%num_agg, SDAT%io_stride, &
PIO_REARR_BOX, SDAT%pio_subsystem, base=SDAT%io_root)
do n = 1,SDAT%nstreams
if (my_task == master_task) then
call shr_stream_getDomainInfo(SDAT%stream(n),filePath,fileName,timeName,lonName, &
latName,maskName,areaName)
call shr_stream_getFile(filePath,fileName)
endif
call shr_mpi_bcast(fileName,mpicom)
call shr_mpi_bcast(lonName,mpicom)
call shr_mpi_bcast(latName,mpicom)
call shr_mpi_bcast(maskName,mpicom)
call shr_mpi_bcast(areaName,mpicom)
call shr_dmodel_readgrid(SDAT%gridR(n),SDAT%gsmapR(n),SDAT%strnxg(n),SDAT%strnyg(n), &
fileName, compid, mpicom, '1d', lonName, latName, maskName, areaName)
SDAT%lsizeR(n) = mct_gsmap_lsize(SDAT%gsmapR(n),mpicom)
call mct_gsmap_OrderedPoints(SDAT%gsmapR(n), my_task, dof)
call pio_initdecomp(SDAT%pio_subsystem, pio_double, &
(/SDAT%strnxg(n),SDAT%strnyg(n)/), dof, SDAT%pio_iodesc(n))
deallocate(dof)
enddo
! --- initialize model domain ---
if (present(gsmap)) then
SDAT%nxg = nxg
SDAT%nyg = nyg
lsize = mct_gsmap_lsize(gsmap,mpicom)
call mct_gsmap_Copy(gsmap,SDAT%gsmap)
call mct_ggrid_init(SDAT%grid, ggrid, lsize)
call mct_aVect_copy(ggrid%data, SDAT%grid%data)
else
if (trim(SDAT%domainfile) == trim(shr_strdata_nullstr)) then
if (SDAT%nstreams > 0) then
if (my_task == master_task) then
call shr_stream_getDomainInfo(SDAT%stream(1),filePath,fileName,timeName,lonName, &
latName,maskName,areaName)
call shr_stream_getFile(filePath,fileName)
endif
call shr_mpi_bcast(fileName,mpicom)
call shr_mpi_bcast(lonName,mpicom)
call shr_mpi_bcast(latName,mpicom)
call shr_mpi_bcast(maskName,mpicom)
call shr_mpi_bcast(areaName,mpicom)
if (lscmmode) then
call shr_dmodel_readgrid(SDAT%grid,SDAT%gsmap,SDAT%nxg,SDAT%nyg, &
fileName, compid, mpicom, '1d', lonName, latName, maskName, areaName, &
scmmode=lscmmode,scmlon=scmlon,scmlat=scmlat)
else
call shr_dmodel_readgrid(SDAT%grid,SDAT%gsmap,SDAT%nxg,SDAT%nyg, &
fileName, compid, mpicom, '1d', lonName, latName, maskName, areaName)
endif
endif
else
if (lscmmode) then
call shr_dmodel_readgrid(SDAT%grid,SDAT%gsmap,SDAT%nxg,SDAT%nyg, &
SDAT%domainfile, compid, mpicom, '1d', readfrac=.true., &
scmmode=lscmmode,scmlon=scmlon,scmlat=scmlat)
else
call shr_dmodel_readgrid(SDAT%grid,SDAT%gsmap,SDAT%nxg,SDAT%nyg, &
SDAT%domainfile, compid, mpicom, '1d', readfrac=.true.)
endif
endif
endif
SDAT%lsize = mct_gsmap_lsize(SDAT%gsmap,mpicom)
! --- setup mapping ---
do n = 1,SDAT%nstreams
if (shr_dmodel_gGridCompare(SDAT%gridR(n),SDAT%gsmapR(n),SDAT%grid,SDAT%gsmap, &
shr_dmodel_gGridCompareMaskSubset,mpicom) .or. trim(SDAT%fillalgo(n))=='none') then
SDAT%dofill(n) = .false.
else
SDAT%dofill(n) = .true.
endif
if (trim(SDAT%mapmask(n)) == 'dstmask') then
method = shr_dmodel_gGridCompareXYabsMask
else
method = shr_dmodel_gGridCompareXYabs
endif
if (shr_dmodel_gGridCompare(SDAT%gridR(n),SDAT%gsmapR(n),SDAT%grid,SDAT%gsmap, &
method,mpicom,0.01_r8) .or. trim(SDAT%mapalgo(n))=='none') then
SDAT%domaps(n) = .false.
else
SDAT%domaps(n) = .true.
endif
if (SDAT%dofill(n)) then
if (trim(SDAT%fillread(n)) == trim(shr_strdata_unset)) then
if (my_task == master_task) write(logunit,F00) ' calling shr_dmodel_mapSet for fill'
call shr_dmodel_mapSet(SDAT%sMatPf(n), &
SDAT%gridR(n),SDAT%gsmapR(n),SDAT%strnxg(n),SDAT%strnyg(n), &
SDAT%gridR(n),SDAT%gsmapR(n),SDAT%strnxg(n),SDAT%strnyg(n), &
name='mapFill', type='cfill', &
algo=trim(SDAT%fillalgo(n)),mask=trim(SDAT%fillmask(n)),vect='scalar', &
compid=compid,mpicom=mpicom)
if (trim(SDAT%fillwrit(n)) /= trim(shr_strdata_unset)) then
if (my_task == master_task) write(logunit,F00) ' writing ',trim(SDAT%fillwrit(n))
call shr_mct_sMatWritednc(SDAT%sMatPf(n)%Matrix,SDAT%fillwrit(n),compid,mpicom)
endif
else
if (my_task == master_task) write(logunit,F00) ' reading ',trim(SDAT%fillread(n))
call shr_mct_sMatReaddnc(sMati,SDAT%gsmapR(n),SDAT%gsmapR(n),'src', &
filename=trim(SDAT%fillread(n)),mytask=my_task,mpicom=mpicom)
call mct_sMatP_Init(SDAT%sMatPf(n),sMati,SDAT%gsMapR(n),SDAT%gsmapR(n),0, mpicom, compid)
call mct_sMat_Clean(sMati)
endif
endif
if (SDAT%domaps(n)) then
if (trim(SDAT%mapread(n)) == trim(shr_strdata_unset)) then
if (my_task == master_task) write(logunit,F00) ' calling shr_dmodel_mapSet for remap'
call shr_dmodel_mapSet(SDAT%sMatPs(n), &
SDAT%gridR(n),SDAT%gsmapR(n),SDAT%strnxg(n),SDAT%strnyg(n), &
SDAT%grid ,SDAT%gsmap ,SDAT%nxg ,SDAT%nyg, &
name='mapScalar', type='remap', &
algo=trim(SDAT%mapalgo(n)),mask=trim(SDAT%mapmask(n)), vect='scalar', &
compid=compid,mpicom=mpicom)
if (trim(SDAT%mapwrit(n)) /= trim(shr_strdata_unset)) then
if (my_task == master_task) write(logunit,F00) ' writing ',trim(SDAT%mapwrit(n))
call shr_mct_sMatWritednc(SDAT%sMatPs(n)%Matrix,SDAT%mapwrit(n),compid,mpicom)
endif
else
if (my_task == master_task) write(logunit,F00) ' reading ',trim(SDAT%mapread(n))
call shr_mct_sMatReaddnc(sMati,SDAT%gsmapR(n),SDAT%gsmap,'src', &
filename=trim(SDAT%mapread(n)),mytask=my_task,mpicom=mpicom)
call mct_sMatP_Init(SDAT%sMatPs(n),sMati,SDAT%gsMapR(n),SDAT%gsmap,0, mpicom, compid)
call mct_sMat_Clean(sMati)
endif
else
call mct_rearr_init(SDAT%gsmapR(n), SDAT%gsmap, mpicom, SDAT%rearrR(n))
endif
enddo
! --- setup datatypes ---
do n = 1,SDAT%nstreams
if (my_task == master_task) then
call shr_stream_getModelFieldList(SDAT%stream(n),fldList)
endif
call shr_mpi_bcast(fldList,mpicom)
call mct_aVect_init(SDAT%avs(n) ,rlist=fldList,lsize=SDAT%lsize)
call mct_aVect_init(SDAT%avFLB(n),rlist=fldList,lsize=SDAT%lsize)
call mct_aVect_init(SDAT%avFUB(n),rlist=fldList,lsize=SDAT%lsize)
call mct_aVect_init(SDAT%avRLB(n),rlist=fldList,lsize=SDAT%lsizeR(n))
call mct_aVect_init(SDAT%avRUB(n),rlist=fldList,lsize=SDAT%lsizeR(n))
if (trim(SDAT%tintalgo(n)) == 'coszen') then
call mct_aVect_init(SDAT%avCoszen(n),rlist="tavCosz",lsize=SDAT%lsize)
endif
enddo
! --- check vectors and compute ustrm,vstrm ---
do m = 1,SDAT%nvectors
if (.not. shr_string_listIsValid(SDAT%vectors(m))) then
write(logunit,*) trim(subname),' vec fldlist invalid m=',m,trim(SDAT%vectors(m))
call shr_sys_abort(subname//': vec fldlist invalid:'//trim(SDAT%vectors(m)))
endif
if (shr_string_listGetNum(SDAT%vectors(m)) /= 2) then
write(logunit,*) trim(subname),' vec fldlist ne 2 m=',m,trim(SDAT%vectors(m))
call shr_sys_abort(subname//': vec fldlist ne 2:'//trim(SDAT%vectors(m)))
endif
call shr_string_listGetName(SDAT%vectors(m),1,uname)
call shr_string_listGetName(SDAT%vectors(m),2,vname)
nu = 0
nv = 0
do n = 1,SDAT%nstreams
k = mct_aVect_indexRA(SDAT%avRLB(n),trim(uname),perrWith='quiet')
if (k > 0) nu = n
k = mct_aVect_indexRA(SDAT%avRLB(n),trim(vname),perrWith='quiet')
if (k > 0) nv = n
enddo
if (nu == 0 .or. nv == 0) then
write(logunit,*) trim(subname),' vec flds not found m=',m,trim(SDAT%vectors(m))
call shr_sys_abort(subname//': vec flds not found:'//trim(SDAT%vectors(m)))
endif
if (nu /= nv) then
if ((.not. shr_dmodel_gGridCompare(SDAT%gridR(nu),SDAT%gsmapR(nu), &
SDAT%gridR(nv),SDAT%gsmapR(nv), &
shr_dmodel_gGridCompareXYabs,mpicom,0.01_r8)) .or. &
(.not. shr_dmodel_gGridCompare(SDAT%gridR(nu),SDAT%gsmapR(nu), &
SDAT%gridR(nv),SDAT%gsmapR(nv), &
shr_dmodel_gGridCompareMaskZeros,mpicom))) then
write(logunit,*) trim(subname),' vec fld doms not same m=',m,trim(SDAT%vectors(m))
call shr_sys_abort(subname//': vec fld doms not same:'//trim(SDAT%vectors(m)))
endif
endif
SDAT%ustrm(m) = nu
SDAT%vstrm(m) = nv
enddo
end subroutine shr_strdata_init
!===============================================================================
subroutine shr_strdata_advance(SDAT,ymd,tod,mpicom,istr,timers) 6,11
implicit none
type(shr_strdata_type),intent(inout) :: SDAT
integer(IN),intent(in) :: ymd
integer(IN),intent(in) :: tod
integer(IN),intent(in) :: mpicom
character(len=*),intent(in),optional :: istr
logical ,intent(in),optional :: timers
integer(IN) :: n,m,i,k,l,kf ! generic index
integer(IN) :: my_task,npes
integer(IN),parameter :: master_task = 0
logical :: mssrmlf
logical,allocatable :: newData(:)
integer(IN) :: ierr
integer(IN) :: nu,nv
integer(IN) :: lsize,lsizeR,lsizeF
integer(IN) :: yy,mm,dd
type(mct_avect) :: avRtmp
type(mct_avect) :: avRV,avFV
character(len=32) :: lstr
logical :: ltimers
real(R8) :: flb,fub ! factor for lb and ub
!--- for cosz method ---
real(R8) :: calday ! julian day of year
real(R8) :: declin ! solar declination (radians)
real(R8) :: eccf ! earth sun distance factor
real(R8),pointer :: lonr(:) ! lon radians
real(R8),pointer :: latr(:) ! lat radians
real(R8),pointer :: cosz(:) ! cosz
real(R8),pointer :: tavCosz(:) ! cosz, time avg over [LB,UB]
real(R8),pointer :: xlon(:),ylon(:)
real(R8),parameter :: solZenMin = 0.001_R8 ! minimum solar zenith angle
integer(IN) :: edayLB,edayUB ! elapsed days
real(R8) :: dtime ! delta time
integer(IN) :: uvar,vvar
logical :: someNewData ! newData test
character(CS) :: uname ! u vector field name
character(CS) :: vname ! v vector field name
character(len=*),parameter :: timname = "_strd_adv"
integer(IN),parameter :: tadj = 2
!----- formats -----
character(*),parameter :: subname = "(shr_strdata_advance) "
!-------------------------------------------------------------------------------
!
!-------------------------------------------------------------------------------
if (SDAT%nstreams < 1) return
lstr = ''
if (present(istr)) then
lstr = trim(istr)
endif
ltimers = .true.
if (present(timers)) then
ltimers = timers
endif
if (.not.ltimers) call t_adj_detailf(tadj)
call MPI_COMM_SIZE(mpicom,npes,ierr)
call MPI_COMM_RANK(mpicom,my_task,ierr)
mssrmlf = .false.
SDAT%ymd = ymd
SDAT%tod = tod
if (SDAT%nstreams > 0) then
allocate(newData(SDAT%nstreams))
do n = 1,SDAT%nstreams
call t_barrierf(trim(lstr)//trim(timname)//'_readLBUB_BARRIER',mpicom)
call t_startf(trim(lstr)//trim(timname)//'_readLBUB')
call shr_dmodel_readLBUB(SDAT%stream(n),SDAT%pio_subsystem,SDAT%io_type,SDAT%pio_iodesc(n), &
ymd,tod,mpicom,SDAT%gsmapR(n),&
SDAT%avRLB(n),SDAT%ymdLB(n),SDAT%todLB(n), &
SDAT%avRUB(n),SDAT%ymdUB(n),SDAT%todUB(n),newData(n), &
istr=trim(lstr)//'_readLBUB')
if (newData(n)) then
call shr_cal_date2eday(SDAT%ymdLB(n),edayLB)
call shr_cal_date2eday(SDAT%ymdUB(n),edayUB)
dtime = abs(real(edayUB-edayLB,R8) + real(SDAT%todUB(n)-SDAT%todLB(n),R8)/shr_const_cDay)
SDAT%dtmin(n) = min(SDAT%dtmin(n),dtime)
SDAT%dtmax(n) = max(SDAT%dtmax(n),dtime)
if ((SDAT%dtmax(n)/SDAT%dtmin(n)) > SDAT%dtlimit(n)) then
write(logunit,*) trim(subName),' ERROR: dt limit1 ',SDAT%dtmax(n),SDAT%dtmin(n),SDAT%dtlimit(n)
write(logunit,*) trim(subName),' ERROR: dt limit2 ',SDAT%ymdLB(n),SDAT%todLB(n), &
SDAT%ymdUB(n),SDAT%todUB(n)
call shr_sys_abort(trim(subName)//' ERROR dt limit')
endif
endif
call t_stopf(trim(lstr)//trim(timname)//'_readLBUB')
enddo
do n = 1,SDAT%nstreams
if (newData(n)) then
if (SDAT%doFill(n)) then
call t_startf(trim(lstr)//trim(timname)//'_fill')
lsize = mct_aVect_lsize(SDAT%avRLB(n))
call mct_aVect_init(avRtmp,SDAT%avRLB(n),lsize)
call mct_aVect_copy(SDAT%avRLB(n),avRtmp)
call mct_sMat_avMult(avRtmp,SDAT%sMatPf(n),SDAT%avRLB(n))
call mct_aVect_copy(SDAT%avRUB(n),avRtmp)
call mct_sMat_avMult(avRtmp,SDAT%sMatPf(n),SDAT%avRUB(n))
call mct_aVect_clean(avRtmp)
call t_stopf(trim(lstr)//trim(timname)//'_fill')
endif
if (SDAT%domaps(n)) then
call t_startf(trim(lstr)//trim(timname)//'_map')
call mct_sMat_avMult(SDAT%avRLB(n),SDAT%sMatPs(n),SDAT%avFLB(n))
call mct_sMat_avMult(SDAT%avRUB(n),SDAT%sMatPs(n),SDAT%avFUB(n))
call t_stopf(trim(lstr)//trim(timname)//'_map')
else
call t_startf(trim(lstr)//trim(timname)//'_rearr')
call mct_rearr_rearrange(SDAT%avRLB(n),SDAT%avFLB(n),SDAT%rearrR(n))
call mct_rearr_rearrange(SDAT%avRUB(n),SDAT%avFUB(n),SDAT%rearrR(n))
call t_stopf(trim(lstr)//trim(timname)//'_rearr')
endif
endif
enddo
do m = 1,SDAT%nvectors
nu = SDAT%ustrm(m)
nv = SDAT%vstrm(m)
if ((SDAT%domaps(nu) .or. SDAT%domaps(nv)) .and. &
(newdata(nu) .or. newdata(nv))) then
call t_startf(trim(lstr)//trim(timname)//'_vect')
call shr_string_listGetName(SDAT%vectors(m),1,uname)
call shr_string_listGetName(SDAT%vectors(m),2,vname)
lsizeR = mct_aVect_lsize(SDAT%avRLB(nu))
lsizeF = mct_aVect_lsize(SDAT%avFLB(nu))
call mct_aVect_init(avRV,rlist=SDAT%vectors(m),lsize=lsizeR)
call mct_aVect_init(avFV,rlist=SDAT%vectors(m),lsize=lsizeF)
call mct_aVect_exportRattr(SDAT%gridR(nu)%data,'lon',xlon)
call mct_aVect_exportRattr(SDAT%grid %data,'lon',ylon)
xlon = xlon * deg2rad
ylon = ylon * deg2rad
!--- map LB ---
uvar = mct_aVect_indexRA(SDAT%avRLB(nu),trim(uname))
vvar = mct_aVect_indexRA(SDAT%avRLB(nv),trim(vname))
do i = 1,lsizeR
avRV%rAttr(1,i) = SDAT%avRLB(nu)%rAttr(uvar,i) * cos(xlon(i)) &
-SDAT%avRLB(nv)%rAttr(vvar,i) * sin(xlon(i))
avRV%rAttr(2,i) = SDAT%avRLB(nu)%rAttr(uvar,i) * sin(xlon(i)) &
+SDAT%avRLB(nv)%rAttr(vvar,i) * cos(xlon(i))
enddo
call mct_sMat_avMult(avRV,SDAT%sMatPs(nu),avFV)
! --- don't need to recompute uvar and vvar, should be the same
! uvar = mct_aVect_indexRA(SDAT%avFLB(nu),trim(uname))
! vvar = mct_aVect_indexRA(SDAT%avFLB(nv),trim(vname))
do i = 1,lsizeF
SDAT%avFLB(nu)%rAttr(uvar,i) = avFV%rAttr(1,i) * cos(ylon(i)) &
+avFV%rAttr(2,i) * sin(ylon(i))
SDAT%avFLB(nv)%rAttr(vvar,i) = -avFV%rAttr(1,i) * sin(ylon(i)) &
+avFV%rAttr(2,i) * cos(ylon(i))
enddo
!--- map UB ---
uvar = mct_aVect_indexRA(SDAT%avRUB(nu),trim(uname))
vvar = mct_aVect_indexRA(SDAT%avRUB(nv),trim(vname))
do i = 1,lsizeR
avRV%rAttr(1,i) = SDAT%avRUB(nu)%rAttr(uvar,i) * cos(xlon(i)) &
-SDAT%avRUB(nv)%rAttr(vvar,i) * sin(xlon(i))
avRV%rAttr(2,i) = SDAT%avRUB(nu)%rAttr(uvar,i) * sin(xlon(i)) &
+SDAT%avRUB(nv)%rAttr(vvar,i) * cos(xlon(i))
enddo
call mct_sMat_avMult(avRV,SDAT%sMatPs(nu),avFV)
! --- don't need to recompute uvar and vvar, should be the same
! uvar = mct_aVect_indexRA(SDAT%avFUB(nu),trim(uname))
! vvar = mct_aVect_indexRA(SDAT%avFUB(nv),trim(vname))
do i = 1,lsizeF
SDAT%avFUB(nu)%rAttr(uvar,i) = avFV%rAttr(1,i) * cos(ylon(i)) &
+avFV%rAttr(2,i) * sin(ylon(i))
SDAT%avFUB(nv)%rAttr(vvar,i) = -avFV%rAttr(1,i) * sin(ylon(i)) &
+avFV%rAttr(2,i) * cos(ylon(i))
enddo
call mct_aVect_clean(avRV)
call mct_aVect_clean(avFV)
deallocate(xlon,ylon)
call t_stopf(trim(lstr)//trim(timname)//'_vect')
endif
enddo
do n = 1,SDAT%nstreams
!--- method: coszen -------------------------------------------------------
if (trim(SDAT%tintalgo(n)) == 'coszen') then
call t_startf(trim(lstr)//trim(timname)//'_coszen')
!--- make sure orb info has been set ---
if (SDAT%eccen == SHR_ORB_UNDEF_REAL) then
call shr_sys_abort(subname//' ERROR in orb params for coszen tinterp')
else if (SDAT%modeldt < 1) then
call shr_sys_abort(subname//' ERROR: model dt < 1 for coszen tinterp')
endif
!--- allocate avg cosz array ---
lsizeF = mct_aVect_lsize(SDAT%avFLB(n))
allocate(tavCosz(lsizeF),cosz(lsizeF),lonr(lsizeF),latr(lsizeF))
!--- get lat/lon data ---
kf = mct_aVect_indexRA(SDAT%grid%data,'lat')
latr(:) = SDAT%grid%data%rAttr(kf,:) * deg2rad
kf = mct_aVect_indexRA(SDAT%grid%data,'lon')
lonr(:) = SDAT%grid%data%rAttr(kf,:) * deg2rad
call t_startf(trim(lstr)//trim(timname)//'_coszenC')
cosz = 0.0_r8
call shr_tInterp_getCosz(cosz,lonr,latr,ymd,tod, &
SDAT%eccen,SDAT%mvelpp,SDAT%lambm0,SDAT%obliqr)
call t_stopf(trim(lstr)//trim(timname)//'_coszenC')
if (newdata(n)) then
!--- compute a new avg cosz ---
call t_startf(trim(lstr)//trim(timname)//'_coszenN')
call shr_tInterp_getAvgCosz(tavCosz,lonr,latr, &
SDAT%ymdLB(n),SDAT%todLB(n), SDAT%ymdUB(n),SDAT%todUB(n), &
SDAT%eccen,SDAT%mvelpp,SDAT%lambm0,SDAT%obliqr,SDAT%modeldt)
call mct_avect_importRAttr(SDAT%avCoszen(n),'tavCosz',tavCosz,lsizeF)
call t_stopf(trim(lstr)//trim(timname)//'_coszenN')
else
!--- reuse existing avg cosz ---
call mct_avect_exportRAttr(SDAT%avCoszen(n),'tavCosz',tavCosz)
endif
!--- t-interp is LB data normalized with this factor: cosz/tavCosz ---
do i = 1,lsizeF
if (cosz(i) > solZenMin) then
SDAT%avs(n)%rAttr(:,i) = SDAT%avFLB(n)%rAttr(:,i)*cosz(i)/tavCosz(i)
else
SDAT%avs(n)%rAttr(:,i) = 0._r8
endif
enddo
deallocate(tavCosz,cosz,lonr,latr)
call t_stopf(trim(lstr)//trim(timname)//'_coszen')
!--- method: not coszen ---------------------------------------------------
elseif (trim(SDAT%tintalgo(n)) /= trim(shr_strdata_nullstr)) then
call t_startf(trim(lstr)//trim(timname)//'_tint')
call shr_tInterp_getFactors(SDAT%ymdlb(n),SDAT%todlb(n),SDAT%ymdub(n),SDAT%todub(n),SDAT%ymd,SDAT%tod, &
flb,fub,algo=trim(SDAT%tintalgo(n)))
SDAT%avs(n)%rAttr(:,:) = SDAT%avFLB(n)%rAttr(:,:)*flb + SDAT%avFUB(n)%rAttr(:,:)*fub
call t_stopf(trim(lstr)//trim(timname)//'_tint')
else
call t_startf(trim(lstr)//trim(timname)//'_zero')
call mct_avect_zero(SDAT%avs(n))
call t_stopf(trim(lstr)//trim(timname)//'_zero')
endif
enddo
deallocate(newData)
endif ! nstreams > 0
if (.not.ltimers) call t_adj_detailf(-tadj)
end subroutine shr_strdata_advance
!===============================================================================
subroutine shr_strdata_clean(SDAT)
implicit none
type(shr_strdata_type),intent(inout) :: SDAT
integer(IN) :: n
!----- formats -----
character(len=*),parameter :: subname = "(shr_strdata_clean) "
!-------------------------------------------------------------------------------
!
!-------------------------------------------------------------------------------
if (SDAT%nxg * SDAT%nyg == 0) then
return
endif
SDAT%nxg = 0
SDAT%nyg = 0
SDAT%strnxg = 0
SDAT%strnyg = 0
SDAT%nstreams = 0
SDAT%nvectors = 0
SDAT%ustrm = 0
SDAT%vstrm = 0
SDAT%dofill = .false.
SDAT%domaps = .false.
call mct_ggrid_clean(SDAT%grid)
call mct_gsmap_clean(SDAT%gsmap)
do n = 1,nStrMax
! need clean SDAT%stream(n) method
call mct_avect_clean(SDAT%avs(n))
call mct_avect_clean(SDAT%avRLB(n))
call mct_avect_clean(SDAT%avRUB(n))
call mct_avect_clean(SDAT%avFLB(n))
call mct_avect_clean(SDAT%avFUB(n))
call mct_ggrid_clean(SDAT%gridR(n))
call mct_sMatP_clean(SDAT%sMatPf(n))
call mct_sMatP_clean(SDAT%sMatPs(n))
call mct_gsmap_clean(SDAT%gsmapR(n))
enddo
end subroutine shr_strdata_clean
!===============================================================================
!===============================================================================
subroutine shr_strdata_restWrite(filename,SDAT,mpicom,str1,str2) 6,1
implicit none
character(len=*) ,intent(in) :: filename
type(shr_strdata_type),intent(inout) :: SDAT
integer(IN) ,intent(in) :: mpicom
character(len=*) ,intent(in) :: str1
character(len=*) ,intent(in) :: str2
!--- local ----
type(shr_stream_streamtype),pointer :: streams(:)
integer(IN) :: n,my_task,ier
!----- formats -----
character(len=*),parameter :: subname = "(shr_strdata_restWrite) "
!-------------------------------------------------------------------------------
!
!-------------------------------------------------------------------------------
call MPI_COMM_RANK(mpicom,my_task,ier)
if (my_task == 0) then
call shr_stream_restWrite(SDAT%stream,trim(filename),trim(str1),trim(str2),SDAT%nstreams)
endif
end subroutine shr_strdata_restWrite
!===============================================================================
!===============================================================================
subroutine shr_strdata_restRead(filename,SDAT,mpicom) 6,1
implicit none
character(len=*) ,intent(in) :: filename
type(shr_strdata_type),intent(inout) :: SDAT
integer(IN) ,intent(in) :: mpicom
!--- local ----
type(shr_stream_streamtype),pointer :: streams(:)
integer(IN) :: n,my_task,ier
!----- formats -----
character(len=*),parameter :: subname = "(shr_strdata_restRead) "
!-------------------------------------------------------------------------------
!
!-------------------------------------------------------------------------------
call MPI_COMM_RANK(mpicom,my_task,ier)
if (my_task == 0) then
call shr_stream_restRead(SDAT%stream,trim(filename),SDAT%nstreams)
endif
end subroutine shr_strdata_restRead
!===============================================================================
!===============================================================================
subroutine shr_strdata_setOrbs(SDAT,eccen,mvelpp,lambm0,obliqr,modeldt) 1
implicit none
type(shr_strdata_type),intent(inout) :: SDAT
real(R8),intent(in) :: eccen
real(R8),intent(in) :: mvelpp
real(R8),intent(in) :: lambm0
real(R8),intent(in) :: obliqr
integer(IN),intent(in) :: modeldt
!----- formats -----
character(len=*),parameter :: subname = "(shr_strdata_setOrbs) "
!-------------------------------------------------------------------------------
!
!-------------------------------------------------------------------------------
SDAT%eccen = eccen
SDAT%mvelpp = mvelpp
SDAT%lambm0 = lambm0
SDAT%obliqr = obliqr
SDAT%modeldt = modeldt
end subroutine shr_strdata_setOrbs
!===============================================================================
!BOP ===========================================================================
!
! !IROUTINE: shr_strdata_readnml -- read control strdata
!
! !DESCRIPTION:
! Reads strdata common to all data models
!
! !REVISION HISTORY:
! 2004-Dec-15 - J. Schramm - first version
! 2009-Apr-16 - T. Craig - add minimal parallel support
!
! !INTERFACE: ------------------------------------------------------------------
subroutine shr_strdata_readnml(SDAT,file,rc,mpicom) 8,7
implicit none
! !INPUT/OUTPUT PARAMETERS:
type(shr_strdata_type),intent(inout):: SDAT ! strdata data data-type
character(*),optional ,intent(in) :: file ! file to read strdata from
integer(IN),optional ,intent(out) :: rc ! return code
integer(IN),optional ,intent(in) :: mpicom ! mpi comm
!EOP
integer(IN) :: rCode ! return code
integer(IN) :: nUnit ! fortran i/o unit number
integer(IN) :: n ! generic loop index
integer(IN) :: my_task ! my task number, 0 is default
integer(IN) :: master_task ! master task number, 0 is default
integer(IN) :: ntasks ! total number of tasks
!----- temporary/local namelist vars to read int -----
character(CL) :: dataMode ! flags physics options wrt input data
character(CL) :: domainFile ! file containing domain info
character(CL) :: streams(nStrMax) ! stream description file names
character(CL) :: taxMode(nStrMax) ! time axis cycling mode
real(R8) :: dtlimit(nStrMax) ! delta time limiter
character(CL) :: vectors(nVecMax) ! define vectors to vector map
character(CL) :: fillalgo(nStrMax) ! fill algorithm
character(CL) :: fillmask(nStrMax) ! fill mask
character(CL) :: fillread(nStrMax) ! fill mapping file to read
character(CL) :: fillwrite(nStrMax)! fill mapping file to write
character(CL) :: mapalgo(nStrMax) ! scalar map algorithm
character(CL) :: mapmask(nStrMax) ! scalar map mask
character(CL) :: mapread(nStrMax) ! regrid mapping file to read
character(CL) :: mapwrite(nStrMax) ! regrid mapping file to write
character(CL) :: tintalgo(nStrMax) ! time interpolation algorithm
character(CL) :: io_type
integer(IN) :: num_iotasks
integer(IN) :: io_root
integer(IN) :: io_stride
integer(IN) :: num_agg
character(CL) :: fileName ! generic file name
integer(IN) :: yearFirst ! first year to use in data stream
integer(IN) :: yearLast ! last year to use in data stream
integer(IN) :: yearAlign ! data year that aligns with yearFirst
!----- define namelist -----
namelist / shr_strdata_nml / &
dataMode &
, domainFile &
, streams &
, taxMode &
, dtlimit &
, vectors &
, fillalgo &
, fillmask &
, fillread &
, fillwrite &
, mapalgo &
, mapmask &
, mapread &
, mapwrite &
, tintalgo &
, io_type &
, num_iotasks &
, io_root &
, io_stride &
, num_agg
!----- formats -----
character(*),parameter :: subName = "(shr_strdata_readnml) "
character(*),parameter :: F00 = "('(shr_strdata_readnml) ',8a)"
character(*),parameter :: F01 = "('(shr_strdata_readnml) ',a,i6,a)"
character(*),parameter :: F02 = "('(shr_strdata_readnml) ',a,es13.6)"
character(*),parameter :: F03 = "('(shr_strdata_readnml) ',a,l6)"
character(*),parameter :: F04 = "('(shr_strdata_readnml) ',a,i2,a,a)"
character(*),parameter :: F20 = "('(shr_strdata_readnml) ',a,i6,a)"
character(*),parameter :: F90 = "('(shr_strdata_readnml) ',58('-'))"
!-------------------------------------------------------------------------------
!
!-------------------------------------------------------------------------------
if (present(rc)) rc = 0
my_task = 0
master_task = 0
ntasks = 1
if (present(mpicom)) then
call MPI_COMM_RANK(mpicom,my_task,rCode)
call MPI_COMM_SIZE(mpicom,ntasks,rCode)
endif
!--master--task--
if (my_task == master_task) then
!----------------------------------------------------------------------------
! set default values for namelist vars
!----------------------------------------------------------------------------
dataMode = 'NULL'
domainFile = trim(shr_strdata_nullstr)
streams(:) = trim(shr_strdata_nullstr)
taxMode(:) = trim(shr_stream_taxis_cycle)
dtlimit(:) = dtlimit_default
vectors(:) = trim(shr_strdata_nullstr)
fillalgo(:) = 'nn'
fillmask(:) = 'nomask'
fillread(:) = trim(shr_strdata_unset)
fillwrite(:)= trim(shr_strdata_unset)
mapalgo(:) = 'bilinear'
mapmask(:) = 'dstmask'
mapread(:) = trim(shr_strdata_unset)
mapwrite(:) = trim(shr_strdata_unset)
tintalgo(:) = 'linear'
io_type = 'pio_netcdf'
!tcx num_iotasks = ntasks/4
num_iotasks = 1
io_root = 0
io_stride = 4
num_agg = 0 ! pio setting
!----------------------------------------------------------------------------
! read input namelist
!----------------------------------------------------------------------------
if (present(file)) then
write(logunit,F00) 'reading input namelist file: ',trim(file)
nUnit = shr_file_getUnit() ! get unused fortran i/o unit number
open (nUnit,file=trim(file),status="old",action="read")
read (nUnit,nml=shr_strdata_nml,iostat=rCode)
close(nUnit)
call shr_file_freeUnit(nUnit)
if (rCode > 0) then
write(logunit,F01) 'ERROR: reading input namelist, '//trim(file)//' iostat=',rCode
call shr_sys_abort(subName//": namelist read error "//trim(file))
end if
endif
!----------------------------------------------------------------------------
! copy temporary/local namelist vars into data structure
!----------------------------------------------------------------------------
SDAT%dataMode = dataMode
SDAT%domainFile = domainFile
SDAT%streams(:) = streams(:)
SDAT%taxMode(:) = taxMode(:)
SDAT%dtlimit(:) = dtlimit(:)
SDAT%vectors(:) = vectors(:)
SDAT%fillalgo(:) = fillalgo(:)
SDAT%fillmask(:) = fillmask(:)
SDAT%fillread(:) = fillread(:)
SDAT%fillwrit(:) = fillwrite(:)
SDAT%mapalgo(:) = mapalgo(:)
SDAT%mapmask(:) = mapmask(:)
SDAT%mapread(:) = mapread(:)
SDAT%mapwrit(:) = mapwrite(:)
SDAT%tintalgo(:) = tintalgo(:)
do n=1,nStrMax
if (trim(streams(n)) /= trim(shr_strdata_nullstr)) SDAT%nstreams = max(SDAT%nstreams,n)
if (trim(SDAT%taxMode(n)) == trim(shr_stream_taxis_extend)) SDAT%dtlimit(n) = 1.0e30
end do
SDAT%nvectors = 0
do n=1,nVecMax
if (trim(vectors(n)) /= trim(shr_strdata_nullstr)) SDAT%nvectors = n
end do
do n = 1,SDAT%nstreams
call shr_stream_parseInput(SDAT%streams(n),fileName,yearAlign,yearFirst,yearLast)
call shr_stream_init(SDAT%stream(n),fileName,yearFirst,yearLast,yearAlign, &
trim(SDAT%taxMode(n)))
enddo
if (trim(io_type) == 'netcdf') then
SDAT%io_type = iotype_std_netcdf
elseif (trim(io_type) == 'pio_netcdf') then
SDAT%io_type = iotype_netcdf
elseif (trim(io_type) == 'pio_pnetcdf') then
SDAT%io_type = iotype_pnetcdf
else
write(logunit,F00) 'ERROR: unknown io_type, '//trim(io_type)
call shr_sys_abort(subName//": unknown io_type, "//trim(io_type))
endif
SDAT%num_iotasks = num_iotasks
SDAT%io_root = io_root
SDAT%io_stride = io_stride
SDAT%num_agg = num_agg
! call shr_strdata_print(SDAT,trim(file)//' NML_ONLY')
endif ! master_task
!--master--task--
if (present(mpicom)) then
call shr_strdata_bcastnml(SDAT,mpicom)
endif
SDAT%ymdLB = -1
SDAT%todLB = -1
SDAT%ymdUB = -1
SDAT%todUB = -1
SDAT%dtmin = 1.0e30
SDAT%dtmax = 0.0
SDAT%eccen = SHR_ORB_UNDEF_REAL
SDAT%mvelpp = SHR_ORB_UNDEF_REAL
SDAT%lambm0 = SHR_ORB_UNDEF_REAL
SDAT%obliqr = SHR_ORB_UNDEF_REAL
SDAT%modeldt = 0
end subroutine shr_strdata_readnml
!===============================================================================
!BOP ===========================================================================
!
! !IROUTINE: shr_strdata_create -- read control strdata
!
! !DESCRIPTION:
! Reads strdata common to all data models
!
! !REVISION HISTORY:
! 2004-Dec-15 - J. Schramm - first version
! 2009-Apr-16 - T. Craig - add minimal parallel support
!
! !INTERFACE: ------------------------------------------------------------------
subroutine shr_strdata_create(SDAT, name, mpicom, compid, gsmap, ggrid, nxg, nyg, &,4
!--- streams stuff required ---
yearFirst, yearLast, yearAlign, offset, &
domFilePath, domFileName, &
domTvarName, domXvarName, domYvarName, domAreaName, domMaskName, &
filePath, filename, fldListFile, fldListModel, &
!--- strdata optional ---
taxMode, dtlimit, tintalgo, &
fillalgo, fillmask, fillread, fillwrite, &
mapalgo, mapmask, mapread, mapwrite, &
io_type, num_iotasks, io_root, io_stride, num_agg)
implicit none
! !INPUT/OUTPUT PARAMETERS:
type(shr_strdata_type),intent(inout):: SDAT ! strdata data data-type
character(*) ,intent(in) :: name ! name of strdata
integer(IN) ,intent(in) :: mpicom ! mpi comm
integer(IN) ,intent(in) :: compid
type(mct_gsmap) ,intent(in) :: gsmap
type(mct_ggrid) ,intent(in) :: ggrid
integer(IN) ,intent(in) :: nxg
integer(IN) ,intent(in) :: nyg
integer(IN) ,intent(in) :: yearFirst ! first year to use
integer(IN) ,intent(in) :: yearLast ! last year to use
integer(IN) ,intent(in) :: yearAlign ! align yearFirst with this model year
integer(IN) ,intent(in) :: offset ! offset in seconds of stream data
character(*) ,intent(in) :: domFilePath ! domain file path
character(*) ,intent(in) :: domFileName ! domain file name
character(*) ,intent(in) :: domTvarName ! domain time dim name
character(*) ,intent(in) :: domXvarName ! domain x dim name
character(*) ,intent(in) :: domYvarName ! domain y dim nam
character(*) ,intent(in) :: domAreaName ! domain area name
character(*) ,intent(in) :: domMaskName ! domain mask name
character(*) ,intent(in) :: filePath ! path to filenames
character(*) ,intent(in) :: filename(:) ! filename for index filenumber
character(*) ,intent(in) :: fldListFile ! file field names, colon delim list
character(*) ,intent(in) :: fldListModel ! model field names, colon delim list
character(*),optional ,intent(in) :: taxMode
real(R8) ,optional ,intent(in) :: dtlimit
character(*),optional ,intent(in) :: fillalgo ! fill algorithm
character(*),optional ,intent(in) :: fillmask ! fill mask
character(*),optional ,intent(in) :: fillread ! fill mapping file to read
character(*),optional ,intent(in) :: fillwrite ! fill mapping file to write
character(*),optional ,intent(in) :: mapalgo ! scalar map algorithm
character(*),optional ,intent(in) :: mapmask ! scalar map mask
character(*),optional ,intent(in) :: mapread ! regrid mapping file to read
character(*),optional ,intent(in) :: mapwrite ! regrid mapping file to write
character(*),optional ,intent(in) :: tintalgo ! time interpolation algorithm
character(*),optional ,intent(in) :: io_type
integer(IN) ,optional ,intent(in) :: num_iotasks
integer(IN) ,optional ,intent(in) :: io_root
integer(IN) ,optional ,intent(in) :: io_stride
integer(IN) ,optional ,intent(in) :: num_agg
!EOP
! --- local ---
! --- formats ---
character(*),parameter :: subName = "(shr_strdata_create) "
character(*),parameter :: F00 = "('(shr_strdata_create) ',8a)"
!-------------------------------------------------------------------------------
!
!-------------------------------------------------------------------------------
call shr_strdata_readnml(SDAT,mpicom=mpicom)
SDAT%nstreams = 1
if (present(taxMode)) then
SDAT%taxMode(1) = taxMode
if (trim(SDAT%taxMode(1)) == trim(shr_stream_taxis_extend)) SDAT%dtlimit(1) = 1.0e30
endif
if (present(dtlimit)) then
SDAT%dtlimit(1) = dtlimit
endif
if (present(fillalgo)) then
SDAT%fillalgo(1) = fillalgo
endif
if (present(fillmask)) then
SDAT%fillmask(1) = fillmask
endif
if (present(fillread)) then
SDAT%fillread(1) = fillread
endif
if (present(fillwrite)) then
SDAT%fillwrit(1) = fillwrite
endif
if (present(mapalgo)) then
SDAT%mapalgo(1) = mapalgo
endif
if (present(mapmask)) then
SDAT%mapmask(1) = mapmask
endif
if (present(mapread)) then
SDAT%mapread(1) = mapread
endif
if (present(mapwrite)) then
SDAT%mapwrit(1) = mapwrite
endif
if (present(tintalgo)) then
SDAT%tintalgo(1) = tintalgo
endif
if (present(mapmask)) then
SDAT%mapmask(1) = mapmask
endif
if (present(io_type)) then
if (trim(io_type) == 'netcdf') then
SDAT%io_type = iotype_std_netcdf
elseif (trim(io_type) == 'pio_netcdf') then
SDAT%io_type = iotype_netcdf
elseif (trim(io_type) == 'pio_pnetcdf') then
SDAT%io_type = iotype_pnetcdf
else
write(logunit,F00) 'ERROR: unknown io_type, '//trim(io_type)
call shr_sys_abort(subName//": unknown io_type, "//trim(io_type))
endif
endif
if (present(num_iotasks)) then
SDAT%num_iotasks = num_iotasks
endif
if (present(io_root)) then
SDAT%io_root = io_root
endif
if (present(io_stride)) then
SDAT%io_stride = io_stride
endif
if (present(num_agg)) then
SDAT%num_agg = num_agg
endif
call shr_stream_set(SDAT%stream(1),yearFirst,yearLast,yearAlign,offset,taxMode, &
fldListFile,fldListModel,domFilePath,domFileName, &
domTvarName,domXvarName,domYvarName,domAreaName,domMaskName, &
filePath,filename,trim(name))
call shr_strdata_init(SDAT, mpicom, compid, &
gsmap=gsmap, ggrid=ggrid, nxg=nxg, nyg=nyg)
end subroutine shr_strdata_create
!===============================================================================
!BOP ===========================================================================
!
! !IROUTINE: shr_strdata_print -- read control strdata
!
! !DESCRIPTION:
! Reads strdata common to all data models
!
! !REVISION HISTORY:
! 2004-Dec-15 - J. Schramm - first version
! 2009-Apr-16 - T. Craig - add minimal parallel support
!
! !INTERFACE: ------------------------------------------------------------------
subroutine shr_strdata_print(SDAT,name) 6,1
implicit none
! !INPUT/OUTPUT PARAMETERS:
type(shr_strdata_type) ,intent(in) :: SDAT ! strdata data data-type
character(len=*),optional,intent(in) :: name ! just a name for tracking
!EOP
integer(IN) :: n
character(CL) :: lname
!----- formats -----
character(*),parameter :: subName = "(shr_strdata_print) "
character(*),parameter :: F00 = "('(shr_strdata_print) ',8a)"
character(*),parameter :: F01 = "('(shr_strdata_print) ',a,i6,a)"
character(*),parameter :: F02 = "('(shr_strdata_print) ',a,es13.6)"
character(*),parameter :: F03 = "('(shr_strdata_print) ',a,l6)"
character(*),parameter :: F04 = "('(shr_strdata_print) ',a,i2,a,a)"
character(*),parameter :: F05 = "('(shr_strdata_print) ',a,i2,a,i6)"
character(*),parameter :: F06 = "('(shr_strdata_print) ',a,i2,a,l2)"
character(*),parameter :: F07 = "('(shr_strdata_print) ',a,i2,a,es13.6)"
character(*),parameter :: F20 = "('(shr_strdata_print) ',a,i6,a)"
character(*),parameter :: F90 = "('(shr_strdata_print) ',58('-'))"
!-------------------------------------------------------------------------------
!
!-------------------------------------------------------------------------------
lname = 'unknown'
if (present(name)) then
lname = trim(name)
endif
!----------------------------------------------------------------------------
! document datatype settings
!----------------------------------------------------------------------------
write(logunit,F90)
write(logunit,F00) "name = ",trim(lname)
write(logunit,F00) "dataMode = ",trim(SDAT%dataMode)
write(logunit,F00) "domainFile = ",trim(SDAT%domainFile)
write(logunit,F01) "nxg = ",SDAT%nxg
write(logunit,F01) "nyg = ",SDAT%nyg
write(logunit,F01) "io_type = ",SDAT%io_type
write(logunit,F01) "num_iotasks = ",SDAT%num_iotasks
write(logunit,F01) "io_root = ",SDAT%io_root
write(logunit,F01) "io_stride = ",SDAT%io_stride
write(logunit,F01) "num_agg = ",SDAT%num_agg
write(logunit,F02) "eccen = ",SDAT%eccen
write(logunit,F02) "mvelpp = ",SDAT%mvelpp
write(logunit,F02) "lambm0 = ",SDAT%lambm0
write(logunit,F02) "obliqr = ",SDAT%obliqr
write(logunit,F01) "nstreams = ",SDAT%nstreams
do n=1, SDAT%nstreams
write(logunit,F04) " streams (",n,") = ",trim(SDAT%streams(n))
write(logunit,F04) " taxMode (",n,") = ",trim(SDAT%taxMode(n))
write(logunit,F07) " dtlimit (",n,") = ",SDAT%dtlimit(n)
write(logunit,F05) " strnxg (",n,") = ",SDAT%strnxg(n)
write(logunit,F05) " strnyg (",n,") = ",SDAT%strnyg(n)
write(logunit,F06) " dofill (",n,") = ",SDAT%dofill(n)
write(logunit,F04) " fillalgo(",n,") = ",trim(SDAT%fillalgo(n))
write(logunit,F04) " fillmask(",n,") = ",trim(SDAT%fillmask(n))
write(logunit,F04) " fillread(",n,") = ",trim(SDAT%fillread(n))
write(logunit,F04) " fillwrit(",n,") = ",trim(SDAT%fillwrit(n))
write(logunit,F06) " domaps (",n,") = ",SDAT%domaps(n)
write(logunit,F04) " mapalgo (",n,") = ",trim(SDAT%mapalgo(n))
write(logunit,F04) " mapmask (",n,") = ",trim(SDAT%mapmask(n))
write(logunit,F04) " mapread (",n,") = ",trim(SDAT%mapread(n))
write(logunit,F04) " mapwrit (",n,") = ",trim(SDAT%mapwrit(n))
write(logunit,F04) " tintalgo(",n,") = ",trim(SDAT%tintalgo(n))
write(logunit,F01) " "
end do
write(logunit,F01) "nvectors = ",SDAT%nvectors
do n=1, SDAT%nvectors
write(logunit,F04) " vectors (",n,") = ",trim(SDAT%vectors(n))
end do
write(logunit,F90)
call shr_sys_flush(logunit)
end subroutine shr_strdata_print
!===============================================================================
!BOP ===========================================================================
!
! !IROUTINE: shr_strdata_bcastnml -- broadcast control strdata
!
! !DESCRIPTION:
! Broadcast strdata
!
! !REVISION HISTORY:
! 2009-Apr-16 - T. Craig - first version
!
! !INTERFACE: ------------------------------------------------------------------
subroutine shr_strdata_bcastnml(SDAT,mpicom,rc) 1,1
use shr_mpi_mod, only : shr_mpi_bcast
implicit none
! !INPUT/OUTPUT PARAMETERS:
type(shr_strdata_type),intent(inout) :: SDAT ! strdata data data-type
integer(IN) ,intent(in) :: mpicom ! mpi communicator
integer(IN),optional ,intent(out) :: rc ! return code
!EOP
!----- local -----
integer(IN) :: lrc
!----- formats -----
character(*),parameter :: subName = "(shr_strdata_bcastnml) "
!-------------------------------------------------------------------------------
!
!-------------------------------------------------------------------------------
lrc = 0
call shr_mpi_bcast(SDAT%dataMode ,mpicom,'dataMode')
call shr_mpi_bcast(SDAT%domainFile,mpicom,'domainFile')
call shr_mpi_bcast(SDAT%nstreams ,mpicom,'nstreams')
call shr_mpi_bcast(SDAT%nvectors ,mpicom,'nvectors')
call shr_mpi_bcast(SDAT%streams ,mpicom,'streams')
call shr_mpi_bcast(SDAT%taxMode ,mpicom,'taxMode')
call shr_mpi_bcast(SDAT%dtlimit ,mpicom,'dtlimit')
call shr_mpi_bcast(SDAT%vectors ,mpicom,'vectors')
call shr_mpi_bcast(SDAT%fillalgo ,mpicom,'fillalgo')
call shr_mpi_bcast(SDAT%fillmask ,mpicom,'fillmask')
call shr_mpi_bcast(SDAT%fillread ,mpicom,'fillread')
call shr_mpi_bcast(SDAT%fillwrit ,mpicom,'fillwrit')
call shr_mpi_bcast(SDAT%mapalgo ,mpicom,'mapalgo')
call shr_mpi_bcast(SDAT%mapmask ,mpicom,'mapmask')
call shr_mpi_bcast(SDAT%mapread ,mpicom,'mapread')
call shr_mpi_bcast(SDAT%mapwrit ,mpicom,'mapwrit')
call shr_mpi_bcast(SDAT%tintalgo ,mpicom,'tintalgo')
call shr_mpi_bcast(SDAT%io_type ,mpicom,'io_type')
call shr_mpi_bcast(SDAT%num_iotasks,mpicom,'num_iotasks')
call shr_mpi_bcast(SDAT%io_root ,mpicom,'io_root')
call shr_mpi_bcast(SDAT%io_stride ,mpicom,'io_stride')
call shr_mpi_bcast(SDAT%num_agg ,mpicom,'num_agg')
if (present(rc)) then
rc = lrc
endif
end subroutine shr_strdata_bcastnml
!===============================================================================
subroutine shr_strdata_setlogunit(nu)
integer(IN),intent(in) :: nu
character(len=*),parameter :: subname = "(shr_strdata_setlogunit) "
! tcx DOES NOTHING, REMOVE
end subroutine shr_strdata_setlogunit
!===============================================================================
!===============================================================================
end module shr_strdata_mod