Simulations for autoconversion: F cases based on 190

 

F cases based on 190

This configuration use v9 configuration.
We output the high frequency data to assess MJO.
There is a problem of units for nitrogen deposition in these runs. The results is too much vegetation but the runs are consistent with each other.

ID Case Description Diagnostics Diagnostics
1850 aerosol		 Details/Comments
190.001
F2000 based on 190 (v9)
 PD diags PI diags  
190.002
same as 190.001
+ zmconv_ke = 1.0E-6->1.0E-5
 PD diags PI diags  
190.003
same as 190.001
+ zmconv_ke = 1.0E-6->5.0E-6
 PD diags PI diags  
190.004
same as 190.001
+ micro_mg_precip_frac_method = 'in_cloud'->'max_overlap'
 PD diags PI diags  
190.005
same as 190.004
+ clubb_c14 = 2.2->3.0
 PD diags PI diags  
190.006
same as 190.001
+ South American SO2 emissions set to 1850
 PD diags PI diags  
190.007
same as 190.001
+ sea-salt increased by 30%
 PD diags PI diags  
190.008
same as 190.001
+ gamma_coeff=0.30->0.32 (same tuning as Andrew's v9 )
+prescribed_strataero_use_chemtrop =false->true (same tuning as Andrew's v9 )
PD diags PI diags  
190.009
same as 190.001
+ gamma_coeff=0.30->0.32 (same tuning as Andrew's v9 )
 PD diags PI diags  
190.010
same as 190.001
micro_mg_berg_eff_factor = 0.7>1.
 PD diags PI diags  
190.011
same as 190.005
+gamma_coeff=0.30->0.34
PD diags PI diags In this run we have:
micro_mg_precip_frac_method = ''max_overlap'
gamma_coeff=0.30->0.34
clubb_c14 = 2.2->3.0
190.012
same as 190.011
+ micro_mg_berg_eff_factor = 0.7>1.
 PD diags PI diags In this run we have:
micro_mg_precip_frac_method = ''max_overlap'
gamma_coeff=0.30->0.34
clubb_c14 = 2.2->3.0
micro_mg_berg_eff_factor = 0.7>1.
190.013
same as 190.001
+ emissions that include  biomass burning emissions at the surface
 PD diags PI diags  
190.014
same as 190.001
+prescribed_strataero_use_chemtrop = .true.
 PD diags PI diags  
190.015
same as 190.001
+ new ozone, oxid and strataero

tracer_cnst_datapath= '/glade/p/acd/tilmes/inputdata/ozone'
tracer_cnst_file= 'oxid_ozone_CAM6chem_3D_monthly_2000climo_170822.nc'
prescribed_ozone_datapath  = '/glade/p/acd/tilmes/inputdata/ozone'
prescribed_ozone_file= 'oxid_ozone_CAM6chem_3D_monthly_2000climo_170822.nc'
prescribed_strataero_datapath  = '/glade/p/acd/tilmes/inputdata/aero/'
prescribed_strataero_file= 'PrescribedO3MAM_CAM6chem_2000climo_170822.nc'

rad_climate = 'A:Q:H2O', 'N:O2:O2',
'N:CO2:CO2', 'N:ozone:O3',
'N:N2O:N2O', 'N:CH4:CH4',
'N:CFC11:CFC11', 'N:CFC12:CFC12',
'M:mam4_mode1:/glade/p/cesmdata/cseg/inputdata/atm/cam/physprops/
mam4_mode1_rrtmg_aeronetdust_sig1.6_dgnh.48_c140304.nc', 'M:mam4_mode2:/glade/p/cesmdata/cseg/inputdata/atm/cam/physprops/
mam4_mode2_rrtmg_aitkendust_c141106.nc',
'M:mam4_mode3:/glade/p/cesmdata/cseg/inputdata/atm/cam/physprops/
mam4_mode3_rrtmg_aeronetdust_sig1.2_dgnl.40_c150219.nc',
'M:mam4_mode4:/glade/p/cesmdata/cseg/inputdata/atm/cam/physprops/
mam4_mode4_rrtmg_c130628.nc',
'N:VOLC_MMR1:/glade/p/cesmdata/cseg/inputdata/atm/cam/physprops/
volc_camRRTMG_byradius_sigma1.6_mode1_c170214.nc', '
N:VOLC_MMR2:/glade/p/cesmdata/cseg/inputdata/atm/cam/physprops/
volc_camRRTMG_byradius_sigma1.6_mode2_c170214.nc',
'N:VOLC_MMR3:/glade/p/cesmdata/cseg/inputdata/atm/cam/physprops/
volc_camRRTMG_byradius_sigma1.2_mode3_c170214.nc'

 PD diags PI diags New datasets are used to make 1850 and 2000 consistent
190.016
same as 190.001
+ increase of sea-salt by 20%
 PD diags PI diags  
190.017

same as 190.001
+ combination of:
+ new ozone, oxid and strataero (015)
+ increase of sea-salt by 20% (016)
+prescribed_strataero_use_chemtrop = .true. (014)
+ emissions that include  biomass burning emissions at the surface (013)
+ zmconv_ke = 1.0E-6->5.0E-6 (003)

PD diags PI diags  
190.018

same as 190.017
+ micro_mg_berg_eff_factor = 0.7->1.

 PD diags PI diags