Milestone simulations
AMIP type run: 30-level
| ID | Casename | Case Description | Diagnostics | Details/Comments |
|---|---|---|---|---|
| AA1 | f.e12.F1850PDC5.ne30_ne30.amip_L30.001 | AMIP type run | w/ obs |
Comments:Problem with SSTs (compset is using climo SSTs instead of AMIP) |
| AA2 | f.e12.FAMIPC5.ne30_ne30.amip_L30.001 | AMIP type run out-of-the-box |
w/ obs w/ FV 1d var_diags var_diags (FV 1d) |
Comments: None |
| AA3 | f.e12.FAMIPC5.ne30_ne30.amip_gwd_L30.001 | AMIP type run |
w/ obs w/ AA2 |
Comments: None |
AMIP type run: 60-level (Yaga's run)
| ID | Casename | Case Description | Diagnostics | Details/Comments |
|---|---|---|---|---|
| AY1 | 60Lcam5301_FAMIP | AMIP type run: no physics changes (just different vertical resolution simulation) |
Comments: None |
|
| AY2 | 60Lcam5301_B11F2_FAMIP | AMIP type run |
Comments: None |
Development simulations
Coupled simulation: 60-level (Yaga's configuration)
| ID | Casename | Case Description | Diagnostics | Details/Comments |
|---|---|---|---|---|
| CY1 | B1850C5CN_ne30g16_ocnstart_01 | Run start from L30 run at year ? |
Comments: None |
|
| CY2 | B1850C5CN_ne30g16_ocnstart_02 | same as CY1 |
Comments: None |
|
| CY3 | B1850C5CN_ne30g16_ocnstart_03 | same as CY1 |
Comments: None |
|
| CY4 | B1850C5CN_ne30g16_ocnstart_04 | same as CY1 |
Comments: None |
|
| CY5 | B1850C5CN_ne30g16_ocnstart_05 | same as CY1 |
Comments: None |
AMIP type run: 60-level (extra layers in the PBL)
| ID | Casename | Case Description | Diagnostics | Details/Comments |
|---|---|---|---|---|
| AB1 | f.e12.F1850PDC5.ne30_ne30.amip_L60.001 | AMIP type run with L60 (Byron configuration) |
w/ obs w/ L30 w/ Yaga's L60 |
Comments: Problem with SSTs (compset is using climo SSTs instead of AMIP |
| AB2 | f.e12.F1850PDC5.ne30_ne30.amip_L60.002 | AMIP type run with L60 (Byron configuration) +a2l = 30-> 10 |
w/ obs w/ L30 w/ AB1 |
Comments: Problem with SSTs (compset is using climo SSTs instead of AMIP |
| AB3 | f.e12.F1850PDC5.ne30_ne30.amip_L60.003 | AMIP type run with L60 (Byron configuration) +a2l = 30-> 10 + rhminl=0.8975->0.8850 |
w/ obs w/ L30 w/ Yaga's L60 |
Comments: Problem with SSTs (compset is using climo SSTs instead of AMIP |
| AB4 | f.e12.FAMIPC5.ne30_ne30.amip_L60.003 | AMIP type run with L60 (Byron configuration) +a2l = 30-> 10 + rhminl=0.8975->0.8850 |
w/ obs w/ L30 w/ Yaga's L60 var_diags |
Comments: None |
| AB5 | f.e12.FAMIPC5.ne30_ne30.uwsh_L60.004 | Same as AB4 + re-define qt of the updraft source air using qt averaged over the PBL instead of using the value in the lowest model layer' |
w/ obs w/ AB4 |
Comments: None |
| AB6 | f.e12.FAMIPC5.ne30_ne30.uwsh_L60.005 | Same as AB4 + use_cumpenent = .false. |
w/ obs w/ AB4 |
Comments: None |
| AB7 | f.e12.FAMIPC5.ne30_ne30.deep_L60.006 | Same as AB4 + set deep convection launch level to be at least plev-1 and not the surface level. |
w/ AB4 |
Comments: None |
AMIP type run: 120-level (extra layers in the PBL)
| ID | Casename | Case Description | Diagnostics | Details/Comments |
|---|---|---|---|---|
| AC1 | f.e12.F1850PDC5.ne30_ne30.amip_L120.001 | AMIP type run with L120 +a2l = 30-> 10 + rhminl=0.8975->0.8850 |
Comments: We start with the L60 tuning: a2l = 30-> 10 rhminl=0.8975->0.8850 Crashes after 3 months. "(shr_sys_abort) ERROR: negative layer thickness. timestep or remap time too large" => we try to decrease dymanics timestep in AC2 |
|
| AC2 | f.e12.F1850PDC5.ne30_ne30.amip_L120.002 | AMIP type run with L120 +a2l = 30-> 10 + rhminl=0.8975->0.8850 + se_nsplit=2 + rsplit=3 + qsplit=4 |
w/ obs w/ L60 w/ L30 |
Comments: ### Default: se_nsplit = 1 rsplit=5 qsplit=4 => which yields: dt_remap = dt/se_nsplit=1800 dt_tracer = dt_remap/rsplit=360 dt_dyn = dt_dyn/qsplit=90 ### Setting recommended by peter se_nsplit=2 rsplit=3 qsplit=4 => which yields: dt_remap=900 dt_tracer=300 dt_dyn=75 |